Non-insulated window system specifically for interiors
The Schüco AWS 50.NI (Non Insulation) aluminium window system for the basic depth of 50 mm offers extensive solutions for a wide range of requirements without the need for thermal insulation as well as specifically for interior construction.
This is based on the combination of functional properties and architectural design freedom in perfectly tailored components, for example, the combination of narrow face widths with concealed fittings for inward and outward-opening windows.
The high level of flexibility of the system enables a variety of uses as a punched opening, ribbon window or in combination with Schüco sliding systems.
An additional benefit for specifiers and architects is that there are a number of different design options for the window system, such as side-hung and turn/tilt vents, double-vent windows or tilt/slide doors. The following opening types are available for outward-opening windows: projected top-hung, turn/tilt, top-hung, side-hung and an innovative double-vent window.
As part of the Schüco AWS system platform, Schüco AWS 50.NI offers a wide range of profiles for attractive window solutions, including corner mullions, structural mullions, symmetrical mullions and asymmetrical mullions.
Schüco AWS 50.NI, non-insulated aluminium window system
With 50 mm basic depth.
Design features:
Face-fitted vent frame on the room side rebated by 10 mm from the frame edge.
The window designs are provided with a central gasket.
The system must be fitted with square glazing beads.
The glazing beads are installed with plastic clips to compensate tolerances.
Profile depths:
Outer frame, mullion, transom 50 mm
Vent frame (window) 60 mm
Profile face widths:
Outer frame, bottom 88 mm
Outer frame, side and top 66 mm
Mullion 88 mm
Transom 88 mm
Vent frame (window) 40 mm
Vent frame (window door) 40 mm
Double-vent profile (window) 61 mm
Tell us what you need and we’ll get back to you with a custom offer.
Briefly describe your project. We’ll get back to you shortly
