Slimline steel face widths for special architectural requirements
Attractive steel design: thermally insulated Janisol windows from Schüco combine slimline face widths with a high level of functionality, security, comfort and design.
Thanks to a high degree of compatibility between systems and a comprehensive range of fittings for side-hung, turn/tilt, double-vent, and bottom-hung opening types, as well as window doors, the window systems offer flexible options for use in newbuilds and renovations.
System solutions for arched, segmented and studio windows as well as special geometries through laser-welded personal profiles ensure maximum architectural and design freedom.
The highly stable window constructions are optionally available in burglar-resistant and bullet-resistant designs.
Janisol windows
Bullet-resistant FB4 NS in accordance with DIN EN 1522 / 1523
Thermally insulated steel profile system for windows with a basic depth of 60 mm.
Design features:
All corner and T-joints are securely welded together.
The high-quality insulating bar securely joins the half profiles together. It withstands the short-term temperature increases during welding.
In the case of window units with bullet-resistant requirements, the fabrication instructions from the system provider must be observed.
Glass and/or infills of 14 mm to 40 mm can be used.
Face-fitted vent frame on the room side rebated by approx. 8.5 mm from the frame edge.
The weatherstrip system consists of a centre weatherstrip inserted continuously in the insulation zone of the window vents and a plastic profile inserted continuously in the frame. A rebate weatherstrip is inserted continuously on the room side. It is not interrupted by recesses for hinges and/or corner pivots.
Continuous thermal insulation level within the entire construction, even in corner and sash bar areas.
Glazing bead: ???
The infill is sealed in using double-sided tape and sealing is by means of permanently elastic sealing compound.
Profile depths:
Outer frame, transom, mullion 60 mm
Vent frame (window) 64 mm
Profile face widths:
Outer frame (glazing) 47.5/72.5/95 mm
Outer frame extension 25/50 mm
Mullion 70/95 mm
Transom 70/95 mm
Sash bar, fixed glazing 60 mm
Vent frame (window, visible) 35 mm
Double-vent profile (window) 68 mm
Vent sash bar (window) 65 mm
Tell us what you need and we’ll get back to you with a custom offer.
Briefly describe your project. We’ll get back to you shortly
