Highly thermally insulated steel windows with slimline face widths
Excellent thermal insulation combined with attractive design: with Janisol Primo windows from Schüco, cold can be reliably kept outside, even during extreme temperatures – with attractive architectural design freedom for a modern, sustainable building.
Based on narrow, highly-stable steel profiles, the system allows slimline constructions in a light appearance and with a high level of functionality, security, comfort and design.
Arched, segmented and studio windows as well as special geometries thanks to laser-welded personal profiles are all possible.
Together with a comprehensive range of fittings for side-hung, turn/tilt, double-vent, and bottom-hung opening types, as well as window doors, architects and planners have access to a wide range of applications to meet the most varied requirements in newbuilds and renovations.
The highly thermally insulated window systems are optionally available in burglar-resistant and bullet-resistant designs.
Janisol Primo windows
Bullet-resistant FB4 NS in accordance with DIN EN 1522 / 1523
Thermally insulated steel profile system for windows with a basic depth of 60 mm.
Design features:
All corner and T-joints are securely welded together.
The high-quality insulating bar securely joins the half profiles together. It withstands the short-term temperature increases during welding.
In the case of window units with bullet-resistant requirements, the fabrication instructions from the system provider must be observed.
Glass and/or infills of 14 mm to 40 mm can be used.
Face-fitted vent frame on the room side rebated by approx. 8.5 mm from the frame edge.
The weatherstrip system consists of a centre weatherstrip inserted continuously in the insulation zone of the window vents and a plastic profile inserted continuously in the frame. A rebate weatherstrip is inserted continuously on the room side. It is not interrupted by recesses for hinges and/or corner pivots.
Continuous thermal insulation level within the entire construction, even in corner and sash bar areas.
Glazing bead: ???
The infill is sealed in using double-sided tape and sealing is by means of permanently elastic sealing compound.
Profile depths:
Outer frame, transom, mullion 60 mm
Vent frame (window) 64 mm
Profile face widths:
Outer frame 47.5/72.5/95 mm
Outer frame extension 25/50 mm
Mullion 70/95 mm
Transom 70/95 mm
Sash bar, fixed glazing 60 mm
Vent frame (window, visible) 35 mm
Double-vent profile (window) 68 mm
Vent sash bar (window) 65 mm
Tell us what you need and we’ll get back to you with a custom offer.
